Check my coupons
Product Detail
Specification:
Bar end sliderSpec.
[Description]
Parts that bring out the potential of the "Z".
Aluminum machined variable handlebar with AELLA bar end sliders.
AELLA handlebar to transform the Z900RS into a sport riding spec.
■Machined aluminum variable handlebar for sporty riding position
The name of the variable handle comes from the fact that the aperture angle of the handlebar can be adjusted.
The AELLA is available in 19, 21 or 23 degrees, compared to the stock 21 degrees.
It is also possible to create a "hanging angle" by tilting the handle forward.
The height is about 20mm lower and the width is up to 40mm narrower than stock.
■About spacer size
Available in 2mm, 7mm and 12mm.
■AELLA lever guard can also be installed.
More sporty look.
Kit with AELLA bar end sliders can also be installed.(Lever guard is also sold separately)
Aluminum machined variable handlebar with AELLA bar end sliders.
AELLA handlebar to transform the Z900RS into a sport riding spec.
■Machined aluminum variable handlebar for sporty riding position
The name of the variable handle comes from the fact that the aperture angle of the handlebar can be adjusted.
The AELLA is available in 19, 21 or 23 degrees, compared to the stock 21 degrees.
It is also possible to create a "hanging angle" by tilting the handle forward.
The height is about 20mm lower and the width is up to 40mm narrower than stock.
■About spacer size
Available in 2mm, 7mm and 12mm.
■AELLA lever guard can also be installed.
More sporty look.
Kit with AELLA bar end sliders can also be installed.(Lever guard is also sold separately)
Caution
*This bar end slider is designed to fit AELLA bar end sliders (AE-68302). No inserts for stock bar ends.
*Bar-end sliders are not included.
*Stock bar ends cannot be installed. If you use the stock bar end, please select AE-27048.
*If the width of the vehicle is changed more than plus or minus 20mm from the width indicated on the vehicle registration, it is necessary to report the structural change at the time of vehicle inspection. (AE-27048-OP1)
*When installing on a Z900RS, it is necessary to change the cables (brake, gas pedal and clutch cables) to those of the Z900RS.
*The factory grip heater may extend the grip and hit the bar end option.
*The image may include other products and colors.
*Please note that the product specification may change due to manufacturer reasons.
*Bar-end sliders are not included.
*Stock bar ends cannot be installed. If you use the stock bar end, please select AE-27048.
*If the width of the vehicle is changed more than plus or minus 20mm from the width indicated on the vehicle registration, it is necessary to report the structural change at the time of vehicle inspection. (AE-27048-OP1)
*When installing on a Z900RS, it is necessary to change the cables (brake, gas pedal and clutch cables) to those of the Z900RS.
*The factory grip heater may extend the grip and hit the bar end option.
*The image may include other products and colors.
*Please note that the product specification may change due to manufacturer reasons.
