- Home
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Wheel Parts
- Other Wheel parts
- TANIDA
- TANIDA: Wide Tread Spacer
Check my coupons
Product Detail
Specification:
Thickness:10mm
Bolt protrusion:25.5mm
M8:150mm
[Spec. ]
Anodized treatment made of forged aluminum (A6061-T6)
Only *10mm (S45C) high carbon steel with Chromium Plating treatment
Precision high-precision DigitalN/C cutting
JQA inspected by a third-party organization
Hub bolt press-fitted
Taperwith Nut for fixing
・Quantity:1 Set of 2pc.
Bolt protrusion:25.5mm
M8:150mm
[Spec. ]
Anodized treatment made of forged aluminum (A6061-T6)
Only *10mm (S45C) high carbon steel with Chromium Plating treatment
Precision high-precision DigitalN/C cutting
JQA inspected by a third-party organization
Hub bolt press-fitted
Taperwith Nut for fixing
・Quantity:1 Set of 2pc.
[Description]
Bolt On to WideTread.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
[Prohibition of use on steel wheels, etc.]
*Steel wheels cannot be used because the mounting surface is not flat. Aluminum wheels cannot be used if there is no (little) clearance (steal) on the mounting surface.
[Check points for drum brake vehicles].
*The wheel mounting surface may not be flat on some models of vehicles with drum brakes. In such cases, the wheel cannot be installed, so be sure to check before use.
*The spacers are for competition use only and may not be used on public roads. We are not responsible for any accidents that may occur with the spacers installed. Please understand this in advance.
*You may be required to return the car to its original condition for inspection. Please keep the removed parts in a safe place.
*Product contents are subject to change without notice for improvement.
*The colors of the products shown may appear different from the actual colors.
*Use commercially available hub rings if necessary.
*Please note that the product specification may change due to manufacturer reasons.
*Steel wheels cannot be used because the mounting surface is not flat. Aluminum wheels cannot be used if there is no (little) clearance (steal) on the mounting surface.
[Check points for drum brake vehicles].
*The wheel mounting surface may not be flat on some models of vehicles with drum brakes. In such cases, the wheel cannot be installed, so be sure to check before use.
*The spacers are for competition use only and may not be used on public roads. We are not responsible for any accidents that may occur with the spacers installed. Please understand this in advance.
*You may be required to return the car to its original condition for inspection. Please keep the removed parts in a safe place.
*Product contents are subject to change without notice for improvement.
*The colors of the products shown may appear different from the actual colors.
*Use commercially available hub rings if necessary.
*Please note that the product specification may change due to manufacturer reasons.
Applicable Models
Universal
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/