Name: [Closeout Product]HeatGrip TYPE-ROLL(USB TYPE-C)[special price]
Brand: SP Takegawa
SKU: 26143142
Price: 1296000.000000 IDR
Availability: InStock
Rating: 02 (5 reviews)

Specification:

control number:26049908
[Product Size]
Heater section 100mmX130mm, 2m thick
Cable length 1250mm (including USBConnector)

[Description]

This product is a wrapping type HeatGrip that can be attached to Handlebar Grip with a diameter ofΦ32mm-Φ35mm..
Wrap around the Handlebar Grip and secure with the Surface Fastener for easy attachment..
The target is not only Motorcycle but also CycleMotorcycle, Mower, Snow Plow, Fishing Rod, Electric Kick Board, etc.. Can be used with a variety of handlebar grips.
In addition, the USB TYPE-C port power supply allows connection to the USB port of a mobile battery or a USB port in a vehicle for convenient portability..
Temperature control can be selected from 5 levels..

Click here for SP TAKEGAWA WEB Catalogue
Adopts heat-generating PETGold film
The general Grip heater uses an electric heating wire, which takes time for heat conduction, resulting in uneven heat generation..
Heat-generating PETGold film has excellent thermal conductivity and can be heated evenly when generating heat..
Also, unlike electric heating wires, the PETGold film generates heat per surface against the handlebar grip, which means that the heating area is large and the temperature can be uniformed and the temperature rise is SPIDI..

Equipped with a controller for temperature setting
This product is equipped with a controller for temperature setting on the USB TYPE-C Connection Cord..
The controller is equipped in a position close to the USB TYPE-C connection, so it can be stylishly organized..
The MeshFlat cable is used for easy handling and minimizes the bulkiness of the cable..

■5-step temperature control function
Controller allows 5-step temperature control.
The temperature level can be checked visually by using the CollarLamp display..
Red:100 degrees Orange:85 degrees Color:Yellow:75 degrees Green Light:65 degrees Blue:55 degrees Temperature adjustment is operated by a short press of the Button on the Controller, and power on/off is done by a long press of the Button..

■Memory function to record temperature adjustments
The temperature control of the previous use is recorded, so there is no need to adjust the temperature again when the power is turned on again..
Grip warms up at the temperature setting of the last time it was used..

Automatic warm-up function
Warm Up function warms up the Grip heater at high speed for 3 minutes after power-on..
After 3 minutes, the temperature is maintained at the specified collar..

Caution

*Please note that there are cases wherein it has some scratches, dirt and etc. in the package of the outlet sale corresponding product.
*The outlet sale product are subjected to availability. It is impossible to purchase the product in case it is already out of stock.
*The product contents of the outlet sale is subjected to change without prior notice.

*NOTE
If the temperature does not rise after purchase without checking the following precautions, "The temperature does not rise. The power does not turn on." Please contact us if you have any of the following problems
We have received many.
First, please note the following for your vehicle and your mobile battery.
Please take a moment to check.
With USB TYPE-C port (PD supported 18W - MAX30W)
Mobile battery (PD compatible 18W - MAX30W)
12V 1.5A or more
* USB TYPE-C does not support 5V.

*When using this product, USB TYPE-C port for power supply or mobile battery with USB TYPE-C port is required. If the USB port side cannot output 12V 1.5A stably, the amount of heat generated will be insufficient and the product will not perform as intended. When other devices are installed on the USB 2 port type such as external products at the same time, it will also lead to insufficient heat generation. Approximate time for mobile use:10000mA/h MAX level (Red LED:100 degrees):about 1.1 hours, LOW level (Blue LED:55 degrees):about 2.5 hours ←Changes depending on the battery degradation.
*Even if it is a USB TYPE-C port, it does not support 5V. In addition, the shape of the USB TYPE-C connector of this product may not fit when connecting to the USB TYPE-C port of other manufacturers. Please refer to the "USB TYPE-C connector detailed drawing" in the detailed drawing of the heat grip to confirm the dimensions, etc.
*The Heat Grip is not completely waterproof, although it can be used in rain and snow. After use, if it is wet, please make sure to dry it before use.
*The USB TYPE-C connector and the USB TYPE-C port must not be damaged by rain or snow.
*The temperature of heated grips tends to decrease when they are directly exposed to the driving wind. Knuckle guards and handlebar covers can be installed at the same time to prevent the temperature from dropping.
*Corresponding Vehicle
Grip width (overall length):100mm or more
Grip diameter:approx. Φ32mm-Φ35mm)
Car with USB port PD compatible 18W-MAX30W (12V 1.5A or more),.
Or use mobile battery PD compatible 18W-MAX30W (12V 1.5A or more)
USB TYPE-C
*Please refer to the compatibility chart for details.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change. Please be forewarned.
*Please note that the product specification may change due to manufacturer reasons.

[Closeout Product]HeatGrip TYPE-ROLL(USB TYPE-C)[special price]

Applicable Models

Product Detail

Specification:

[Description]

Caution

Applicable Models

ALSO VIEWED PRODUCTS

[Closeout Product]HeatGrip TYPE-ROLL(USB TYPE-C)[special price]

Applicable Models

Product Detail

Specification:

[Description]

Caution

Applicable Models

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

New Custom Article

Apply Coupon

Image Review

Review detail