[Components] Tail Lamp Comp. x 1 (05-08-0337) Flat Head Bolt x 2 (05-08-0337) Spring Washer (6mm) x 2 (05-08-0337) Hex Nut (6mm) x 2 (05-08-0337) Bracket x 1 (80114-GEY-T01) Electro-Tap x 3 (00-05-0015) Tail Light SUB-Harness x 1 (33170-GEY-T00) Flange Bolt (6x16) x 2 (00-00-0134) Flange Nut (6mm) x 2 (00-00-0173) *If there's no link to the repair parts, please quote us through Non-listed Item quotation
- If water gets into the wiring connector or the socket, it may cause a short circuit. If water gets into the wiring connector or the socket, it may cause a short circuit. Be careful not to splash water on the wiring parts when driving in the rain or when washing. If water does get into the lens, remove the lens to remove the water inside. - When installing the product, avoid installing it in a place that generates heat or vibrates violently, as this may cause deformation or bulb breakage. - Do not use gasoline or thinner to clean the product. It may deform the product. - Please note that the lens and case of the lamp will be deformed if the always-on side is used at 10W or more for a long time. When replacing the bulb, make sure to use a 12V 10 / 5W bulb. 12V 10 / 5W clear bulb (glass ball shape G18, BAY15D) Parts No.: 09-03-020 12V 10 / 5W red bulb (glass ball shape G18, BAY15D) Parts No.: 09-03-0106 - This product's tail lamp is for motorized bicycles only. Since the lighting area of the lamp is less than 20cm2, it cannot be used as a brake light for motorcycles. Please use it as an auxiliary light (tail light, number light, etc). - If the product is not (05-08-0340), reflectors are not included.Please buy it separately (09-03-840).
