Check my coupons
Product Detail
Specification:
For 5.5J Super Wide Wheel (Disc Specification)
Swing arm pipe shape:Triple square
Stabilizer: No
Material :Aluminum 7N01 material used
Swing arm pipe shape:Triple square
Stabilizer: No
Material :Aluminum 7N01 material used
[Description]
The Dax / Chaly Super Wide Swingarm is 40mm wider than the stock width (167mm) and 207mm wider inside the swingarm to fit 10 inches 5.5J wide wheels.
It is 20mm wider than the Wide Swingarm (187mm) and the widest among G-Craft Swingarm.
The suspension support is bent outward to prevent the suspension from forming a "c" shape, and the suspension is designed to be attached to the inside of the suspension support.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 2] Pivot part bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Option 3] Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools.
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60059)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.
Note
Swing for other G-Craft Ducks Arms are here.
Swing for other G-Craft Ducks Arms are here.
Other G-Craft Dax swing arms for stock hubs here.
Click here for other G-Craft NSR50 Wheel Mount Dax Swingarm
Click here for other G-Craft Super Wide Wheel Dax Swingarms.
Click here for other G-Craft Dax Swingarms for Wide Wheels. * This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Only triple square pipe, chain slider is also attached at the bottom.
*Image 1 shows the option: Eccentric chain pull.
*Image 3 is the installation image of the pipe shape: Triple Square Mini.
*Image 4 is the image of (1) black anodized finish and (2) Cerakote finish.
*Image 5 is optional :This is an image of the chain slider bolt fixing.
*Image 6 is optional :The image above shows Stand Hook Base (M6).
*Image 7 is optional:This is an image of the pivot bearing specification.
*Image 8 is an image of the chain pull option.
(1) Chain pull:Back pull type
(2) Chain pull:Standard(Racing stand hook specification)
(3) Chain pull:OW type(Racing stand hook specification)
(4) Eccentric type
*Image 1 shows the option: Eccentric chain pull.
*Image 3 is the installation image of the pipe shape: Triple Square Mini.
*Image 4 is the image of (1) black anodized finish and (2) Cerakote finish.
*Image 5 is optional :This is an image of the chain slider bolt fixing.
*Image 6 is optional :The image above shows Stand Hook Base (M6).
*Image 7 is optional:This is an image of the pivot bearing specification.
*Image 8 is an image of the chain pull option.
(1) Chain pull:Back pull type
(2) Chain pull:Standard(Racing stand hook specification)
(3) Chain pull:OW type(Racing stand hook specification)
(4) Eccentric type
Applicable Models
CHALY
DAX
