HONDA CB400 SUPER FOUR
- 19/04/2016
3,089 views
Model Name:CB400 SUPER FOUR
Manufacturer:HONDA
Model Year:1992
Like 1000, this 400 of the Project BIG-1featured a glamorous body line. It had a CB-1 based engine that had stamped fins. It had enhanced its common-use range characteristics.
Specifications:
[Basic spec]
Manufacturer | HONDA | Engine Type | Water-Cooled 4 Stroke DOHC 4-Valve Parallel 4 Cylinder |
---|---|---|---|
Model Name | CB400 SUPER FOUR | Starter | Self Starter |
Grade | – | Maximum Output (ps) | 53ps(39kw)/11000rpm |
Drive Train | – | Maximum Torque (kgf/m) | 3.7kg-m(36.3N-m)/10000rpm |
Model Type | NC31 | Curb Weight | 192 |
Displacement | 399 | Dry Weight | 189(Approximate Value) |
Sales Launch Year | 1992/0 | Fuel Efficiency by Catalog | – |
Height/Width/Length | 1080/-/2085 | Fuel Tank Capacity | – |
Seat Height | – | Distance to Empty | – |
Front Tire Indication | 110/70-17 54H TL | Fuel Supply | Carburetor |
Rear Tire Indication | 140/70-17 66H TL |
[Service data]
Standard Plug | CR8EH-9 | Chain Size | 525 |
---|---|---|---|
Number of Used Plugs | 4 | Chain Link Number | 110 |
Engine Oil Amount | – | Battery Code | FTX9-BS |
Engine Oil (Refill) | 2.7L | Headlight | 12V 60w/55w |
Engine Oil (Element Replacement) | 2.9L | Headlight Type | H4 |
Front Blinker Rating | 12V 18w/5w | Headlight Remarks | – |
Drive Sprocket Teeth Number | 15 | Tail Light Rating | 12V 18w/5w |
Driven Sprocket Teeth Number | 42 | Rear Blinker Rating | 12V 15w |
[Machine detail]
Motor Model Code | NC23E | Caster Angle | – |
---|---|---|---|
Bore (mm) | – | Trail (mm) | – |
Storke (mm) | – | Minimum Ground Clearance | – |
Compression Ratio | – | Distance Between Axes | – |
Ignition Method | Full Transistor Battery Ignition | Streering Angle (Right) | – |
Engine Lubrication Type | – | Turning Angle (Left) | – |
Frame Type | Double Cradle | Mirror Screw Hole Diameter | 10mm |
Minimum Rotaion Radius | – | Fuel Tank Reserve Capacity | – |
[Underbody detail]
Front Brake Type | Double Disc | Suspension Type (Rear) | Swing Arm |
---|---|---|---|
Front Brake Remarks | – | Number of Rear Shock Absorbers | – |
Rear Brake Type | Hydraulic Disc | Rear Suspension Stroke | – |
Rear Brake Remarks | – | Rear Wheel Travel | – |
Suspension Type (Front) | Telescopic | ABS | – |
Front Fork Type | Upright Fork | Drive Train | Chain |
Front Suspension Stroke | – | Differential Oil Amount | – |
Front Fork Diameter | – | Chain Remarks | – |
[Equipment]
Seat Lowering Allowance | – | Theft Prevention Device | – |
---|---|---|---|
Mirror Screw Hole Diameter | 10mm | Tail Light Bulb Type | S25 |
Mirror Remarks | Genuine Adapter: Type D | Tail Light Base Shape | BAY15D |
Electronic Device Remarks | – | Tail Light Base Shape 2 | – |
Fuel Gauge | – | Tail Light Remarks | Glass Shape G18 Also Installable |
Clock | – | Front Blinker Bulb Type | T20 |
Hazard | – | Front Blinker Base Shape | Wedge (Large/Double), Wedge (Middle) |
[Engine detail]
Clutch Type | – | Tappet Clearance (mm) EX | – |
---|---|---|---|
Transmission | – | Idling Initial Value (rpm) | – |
Number of Gears | – | Needle Steps (Clip Location) | – |
Gear Ratio | – | Float Level (mm) | – |
Primary Reduction Ratio | – | Air Screw Return | – |
Secondary Reduction Ratio | 2.8 | Main Jet Type | KEIHIN Round Large (E) |
Variable Speed Vehicle Gear Ratio | – | Main Jet Number | #95+#98 |
Tappet Clearance (mm) IN | – |
[Other spec]
Clutch Cable Length | 910 | Rear Brake Cable Length | 560 |
---|---|---|---|
Choke Cable Length | 800 | Other Cables | Direct (R)770/(L)800 |
Meter Cable Length | 940 | Engine Number (Production Launch) | – |
Throttle Cable Length | 850/880 | Engine Number (Production End) | – |
Front Brake Cable Length | Direct (R)770/(L)800 |
[See Moto Index of HONDA]
[See Accessories for HONDA CB400 SUPER FOUR]