- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Foot Control
- Rearset
- G-Craft
- G-Craft: Rearset 3D Tipe 2 Tromol Black
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Warna: Black
Color: Black
[Deskripsi]
• Pijakan belakang ini menggunakan bagian yang sama dengan yang digunakan untuk pembalap motor besar dan dicegah dengan merancang tidak adanya kekakuan pada struktur rangka (Segi tiga) yang cenderung sejalan dengan monyet. Posisi anak tangga dapat digerakkan naik 40 mm, naik turun 10 mm dengan mengacu pada punggung 125. Step bar adalah tipe pendek untuk mencegah kontak pada saat melakukan banking, dan terdapat notch di dalamnya sehingga alas step bar akan tetap ada meskipun jika terjadi jatuh. Korespondensi Master Silinder Belakang NSR
• dengan Sakelar Lampu Belakang Atas
* Tendangan pedal normal tidak dapat digunakan. Harap gunakan jenis offset seperti untuk Monkey R.
• Dapat mengganggu posisi langkah saat menggunakan pedal tendangan. Knalpot pendek dan knalpot gemuk tidak bisa dipasang secara bersamaan.
• Silakan lihat Instruksi Manual untuk detailnya.
* Tidak dapat dipasang bersamaan dengan kit apung belakang. ●The rearset is made of the same material as the one used for big bike racers, and the truss structure (triangle) is designed to prevent the lack of rigidity that is often seen in the step for monkeys.The step position can be moved 40mm up and 10mm down based on the 125 back.The step bar is shortened to prevent contact when banking, and has a cutout so that the base of the step bar remains in place in the event of a fall.NSR rear master cylinder compatible
●Rear stop lamp switch bracket included
*Stock kick pedal cannot be used.Use an offset type such as for the Monkey R.
●Depending on the step position, there may be interference when using the kick pedal.Short exhaust and fat exhaust cannot be installed at the same time.
●Please refer to the instruction manual for details.
*Cannot be installed with rear floating kit at the same time
• dengan Sakelar Lampu Belakang Atas
* Tendangan pedal normal tidak dapat digunakan. Harap gunakan jenis offset seperti untuk Monkey R.
• Dapat mengganggu posisi langkah saat menggunakan pedal tendangan. Knalpot pendek dan knalpot gemuk tidak bisa dipasang secara bersamaan.
• Silakan lihat Instruksi Manual untuk detailnya.
* Tidak dapat dipasang bersamaan dengan kit apung belakang. ●The rearset is made of the same material as the one used for big bike racers, and the truss structure (triangle) is designed to prevent the lack of rigidity that is often seen in the step for monkeys.The step position can be moved 40mm up and 10mm down based on the 125 back.The step bar is shortened to prevent contact when banking, and has a cutout so that the base of the step bar remains in place in the event of a fall.NSR rear master cylinder compatible
●Rear stop lamp switch bracket included
*Stock kick pedal cannot be used.Use an offset type such as for the Monkey R.
●Depending on the step position, there may be interference when using the kick pedal.Short exhaust and fat exhaust cannot be installed at the same time.
●Please refer to the instruction manual for details.
*Cannot be installed with rear floating kit at the same time
Catatan
Pedal kick starter yang direkomendasikan (KITACO 307-1083900) Tiang rem juga harus diganti untuk pas dengan swingarm. (terhitung lebih pendek 40mm).
Dudukan standar (part number 30104/32090) dijual terpisah diperlukan untuk pemasangan.
Tidak dapat digunakan untuk swingarm tipe Alpha.
untuk tromol
Spesifikasi bagian bergerak pada pedal
Dapat memilih 3 posisi
Naik 30mm
Mundur 125mm
Naik 40mm
Mundur 125mm
Naik 50mm
Mundur 125mm
Klik di sini untuk sparepart pengganti.
Dudukan standar (part number 30104/32090) dijual terpisah diperlukan untuk pemasangan.
Tidak dapat digunakan untuk swingarm tipe Alpha.
untuk tromol
Spesifikasi bagian bergerak pada pedal
Dapat memilih 3 posisi
Naik 30mm
Mundur 125mm
Naik 40mm
Mundur 125mm
Naik 50mm
Mundur 125mm
Klik di sini untuk sparepart pengganti.
Recommended Kick pedal (KITACO 307-1083900) Brake Rod also needs to be replaced to fit the Swing Arm (calculated at -40mm).
Stand holder (part number 30104/32090) sold separately is required for installation..
Not for use with Alpha-type swing arm.
for Drum
Bearing Specification of Pedal Moving Part
3-position selectable
30mm Up
125mmBack
40mm Up
125mmBack
50mm up
125mmBack
Click here for Repair Parts.
Stand holder (part number 30104/32090) sold separately is required for installation..
Not for use with Alpha-type swing arm.
for Drum
Bearing Specification of Pedal Moving Part
3-position selectable
30mm Up
125mmBack
40mm Up
125mmBack
50mm up
125mmBack
Click here for Repair Parts.
Peringatan
*Foto produk hanya untuk referensi. Foto dapat memuat warna dan tipe lainnya.
* The image is only for reference. It may contain other coloring/types.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/