- Beranda
- Motor
- HONDA 251 - 400cc
- CB400SF (Super Four)
- Sparepart Motor
- Sparepart Mesin
- Sparepart Intake
- Karburator
- YOSHIMURA
- YOSHIMURA: Karburator TMR-MJN
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Diameter bore Φ32
Bore diameterΦ32
[Deskripsi]
Pitch karburator : 70-90-70
Diameter Luar SPIGOT : 38mm
Panjang Keseluruhan SPIGOT : 28mm
[Suku Cadang Tambahan yang Diperlukan untuk Pemasangan]
Ini adalah salah satu dari set dudukan throttle berikut.
TMR Body Kecil YOSHIMURA Racing Throttle Holder Set (L = 850mm)
YOSHIMURA Racing Throttle Holder Set untuk TMR Small Body dengan Switch (L = 850mm) (Anda perlu mengganti kabel penggandeng sisi sakelar.)
[Bagian Wajib Tambahan]
Kit Tangki Pernapasan Minyak YOSHIMURA
Puting susu (X-4) Sekrup untuk Ekstraksi Tekanan Negatif (Suku Cadang OEM HONDA)
Puting susu (X-4) Mesin cuci untuk ekstraksi tekanan negatif (Suku Cadang OEM HONDA)
[Mekanisme DUAL STACK]
Corong DUAL STACK adalah mekanisme yang mendemonstrasikan kinerja masing-masing corong pendek dan corong panjang + α. Ini menghadirkan efisiensi pembakaran dan meningkatkan kinerja sesuai dengan setiap corong yang menghasilkan efek sinergis + α satu sama lain, bukan hanya setiap corong yang bekerja di setiap wilayah.
• Dalam kasus area terbuka rendah
Corong 1:
Ini menambah udara yang diperbaiki yang dihirup dari corong ke-2 dan membantu inspirasi tekanan negatif + α. Dalam hal ini, dimungkinkan untuk mengambil dan membakar lebih banyak udara daripada menghirup normal, dan ini mengarah pada peningkatan keluaran di area terbuka yang rendah.
Corong ke-2:
Ini bertindak sebagai corong utama dan menghirup udara yang diperbaiki.
• Dalam kasus area terbuka penuh
Corong 1:
Ini bertindak sebagai corong utama dan dengan cepat memasukkan jumlah udara yang dibutuhkan untuk pembakaran.
Corong ke-2:
Ini membantu inspirasi diperbaiki + α dengan hubungan tekanan negatif karena mengisap corong pertama. Dalam hal ini, dimungkinkan untuk mengambil dan membakar lebih banyak udara daripada menghirup normal, dan ini mengarah pada peningkatan keluaran di area terbuka penuh. Carburetor Pitch :70-90-70
Spigot Outer Diameter :38mm
Spigot Length :28mm
[Separately required parts for installation]
Either of the following throttle holder sets
・Yoshimura Racing Throttle Holder Set for TMR Small Body (L=850mm)
・Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
[Parts required separately]
・Yoshimura Oil Breather Tank Kit
・Nipple for negative pressure extraction (X-4) screw (HONDA stock product)
・Nipple for negative pressure extraction (X-4) Washer (HONDA stock product)
[How the DUAL STACK works]
The DUAL STACK Funnel is designed to provide the performance of both the Short Funnel and the Long Funnel plus alpha.Each funnel does not work only in its own area, but each funnel brings synergistic effect to each other, which leads to the improvement of combustion efficiency, in other words, the improvement of performance.
■In the case of low opening range
・1st funnel:
In addition to the rectified air inhaled from the 2nd funnel, it assists the intake of +α of negative pressure.This allows more air to be drawn in and burned than would normally be the case, leading to an increase in power output at low engine speeds.
・2nd funnel:
It acts as the main funnel and draws in rectified air.
■At full throttle
・1st funnel:
It acts as the main funnel and quickly draws in the necessary amount of air for combustion.
・2nd funnel:
Due to the negative pressure caused by the 1st funnel intake, the rectified +α intake air is assisted.This allows more air to be taken in and burned than would normally be the case, leading to an increase in power output at full throttle.
Diameter Luar SPIGOT : 38mm
Panjang Keseluruhan SPIGOT : 28mm
[Suku Cadang Tambahan yang Diperlukan untuk Pemasangan]
Ini adalah salah satu dari set dudukan throttle berikut.
TMR Body Kecil YOSHIMURA Racing Throttle Holder Set (L = 850mm)
YOSHIMURA Racing Throttle Holder Set untuk TMR Small Body dengan Switch (L = 850mm) (Anda perlu mengganti kabel penggandeng sisi sakelar.)
[Bagian Wajib Tambahan]
Kit Tangki Pernapasan Minyak YOSHIMURA
Puting susu (X-4) Sekrup untuk Ekstraksi Tekanan Negatif (Suku Cadang OEM HONDA)
Puting susu (X-4) Mesin cuci untuk ekstraksi tekanan negatif (Suku Cadang OEM HONDA)
[Mekanisme DUAL STACK]
Corong DUAL STACK adalah mekanisme yang mendemonstrasikan kinerja masing-masing corong pendek dan corong panjang + α. Ini menghadirkan efisiensi pembakaran dan meningkatkan kinerja sesuai dengan setiap corong yang menghasilkan efek sinergis + α satu sama lain, bukan hanya setiap corong yang bekerja di setiap wilayah.
• Dalam kasus area terbuka rendah
Corong 1:
Ini menambah udara yang diperbaiki yang dihirup dari corong ke-2 dan membantu inspirasi tekanan negatif + α. Dalam hal ini, dimungkinkan untuk mengambil dan membakar lebih banyak udara daripada menghirup normal, dan ini mengarah pada peningkatan keluaran di area terbuka yang rendah.
Corong ke-2:
Ini bertindak sebagai corong utama dan menghirup udara yang diperbaiki.
• Dalam kasus area terbuka penuh
Corong 1:
Ini bertindak sebagai corong utama dan dengan cepat memasukkan jumlah udara yang dibutuhkan untuk pembakaran.
Corong ke-2:
Ini membantu inspirasi diperbaiki + α dengan hubungan tekanan negatif karena mengisap corong pertama. Dalam hal ini, dimungkinkan untuk mengambil dan membakar lebih banyak udara daripada menghirup normal, dan ini mengarah pada peningkatan keluaran di area terbuka penuh. Carburetor Pitch :70-90-70
Spigot Outer Diameter :38mm
Spigot Length :28mm
[Separately required parts for installation]
Either of the following throttle holder sets
・Yoshimura Racing Throttle Holder Set for TMR Small Body (L=850mm)
・Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
[Parts required separately]
・Yoshimura Oil Breather Tank Kit
・Nipple for negative pressure extraction (X-4) screw (HONDA stock product)
・Nipple for negative pressure extraction (X-4) Washer (HONDA stock product)
[How the DUAL STACK works]
The DUAL STACK Funnel is designed to provide the performance of both the Short Funnel and the Long Funnel plus alpha.Each funnel does not work only in its own area, but each funnel brings synergistic effect to each other, which leads to the improvement of combustion efficiency, in other words, the improvement of performance.
■In the case of low opening range
・1st funnel:
In addition to the rectified air inhaled from the 2nd funnel, it assists the intake of +α of negative pressure.This allows more air to be drawn in and burned than would normally be the case, leading to an increase in power output at low engine speeds.
・2nd funnel:
It acts as the main funnel and draws in rectified air.
■At full throttle
・1st funnel:
It acts as the main funnel and quickly draws in the necessary amount of air for combustion.
・2nd funnel:
Due to the negative pressure caused by the 1st funnel intake, the rectified +α intake air is assisted.This allows more air to be taken in and burned than would normally be the case, leading to an increase in power output at full throttle.
Catatan
- Jika kran bensin bersinggungan selama pemasangan produk ini, mungkin Anda bisa mengganti kran bensin dengan kran bensin dari brand lain seperti Pingel. (Produk ini tidak dapat digunakan untuk motor dengan fuel pump).
- If the fuel cock interferes during installation, it may be avoided by replacing with an external cock such as Pingel. (This product cannot be used for bikes with fuel pump.)
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
- Panjang kabel gas merupakan panjang setelan standar. Harap diperhatikan mungkin dapat beragam tergantung dari pemasangannya.
*Harap perhatikan sebelumnya bahwa pembatalan dan/atau pengembalian produk tidak bisa diterima setelah pesanan dibuat. - The length of the throttle wire is a standard setting. Please note that it may vary depending on the installation.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Harap perhatikan sebelumnya bahwa pembatalan dan/atau pengembalian produk tidak bisa diterima setelah pesanan dibuat. - The length of the throttle wire is a standard setting. Please note that it may vary depending on the installation.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/