- Beranda
- Aksesoris
- Box Sepeda Motor
- Side Box / Pannier
- GIVI
- GIVI: Box Samping Aluminium Monokey TREKKER OUTBACK [OBK48PACK2]
Box Samping Aluminium Monokey TREKKER OUTBACK [OBK48PACK2]
- Nomor produk: 98490
-
- IN STOCK
- Out Stock
-
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Kapasitas : 48L (1Case) ]
Bahan : Aluminium
Ukuran : Kedalaman 495 x Lebar306 x Tinggi (Bagian luar) 387 (mm)
Daya Dukung Maksimum : 10kg (Satu sisi)
Kuantitas : Pasangan (untuk Kiri dan Kanan) [Capacity: 48 liters (1 case)]
Material: Aluminum
Size: Depth 495 x Width 306 x Height (outside) 387 (mm)
Maximum loading capacity: 10kg (one side)
Left / Right set
Bahan : Aluminium
Ukuran : Kedalaman 495 x Lebar306 x Tinggi (Bagian luar) 387 (mm)
Daya Dukung Maksimum : 10kg (Satu sisi)
Kuantitas : Pasangan (untuk Kiri dan Kanan) [Capacity: 48 liters (1 case)]
Material: Aluminum
Size: Depth 495 x Width 306 x Height (outside) 387 (mm)
Maximum loading capacity: 10kg (one side)
Left / Right set
[Deskripsi]
Sistem MONOKEY CAM digunakan untuk mengatasi getaran keras dan tekanan ekstrim yang melekat pada Off-road ..
Diameter Pipa Fitting lebih tebal dari 18mm konvensional, Case didukung oleh 4 titik kuat, CaseBody mengadopsi pelat aluminium setebal 1.5mm dan TechnoPolymerParts untuk penguatan bagian sudut.
Saat memasang casing atas yang besar, engsel dapat dibuka dan penutup atas dapat dibuka atau ditutup.
Selain itu, dimungkinkan untuk membawa bagasi yang cukup besar untuk keluar dari Case dengan melepas penutup atas sepenuhnya ..
10kg (1 Kasus) Hal ini dimungkinkan untuk melepaskan Tutup Atas.
untuk Top Case Key & Cylinder yang Sama Jumlah: 1 Set disertakan.
Ini memungkinkan Anda untuk menggunakan kunci yang sama saat Anda menginstal Triple .. Newly developed "MONOKEY CAM System" to cope with the severe vibration and extreme stress of off-road.
The diameter of the fitting pipe is 18mm, which is thicker than the conventional one, and the case is supported by 4 points. The case body adopts 1.5mm thick aluminum plate and techno polymer parts for reinforcing the corners.
When a large top case is installed at the same time, the hinge can be opened and the top cover can be slid open and closed.
In addition, by completely removing the top cover, you can carry a large load that protrudes from the case.
Removable top cover.
Includes 1 set of Same key & cylinder for top case.
This makes it possible to use the same key for triple installation.
Diameter Pipa Fitting lebih tebal dari 18mm konvensional, Case didukung oleh 4 titik kuat, CaseBody mengadopsi pelat aluminium setebal 1.5mm dan TechnoPolymerParts untuk penguatan bagian sudut.
Saat memasang casing atas yang besar, engsel dapat dibuka dan penutup atas dapat dibuka atau ditutup.
Selain itu, dimungkinkan untuk membawa bagasi yang cukup besar untuk keluar dari Case dengan melepas penutup atas sepenuhnya ..
10kg (1 Kasus) Hal ini dimungkinkan untuk melepaskan Tutup Atas.
untuk Top Case Key & Cylinder yang Sama Jumlah: 1 Set disertakan.
Ini memungkinkan Anda untuk menggunakan kunci yang sama saat Anda menginstal Triple .. Newly developed "MONOKEY CAM System" to cope with the severe vibration and extreme stress of off-road.
The diameter of the fitting pipe is 18mm, which is thicker than the conventional one, and the case is supported by 4 points. The case body adopts 1.5mm thick aluminum plate and techno polymer parts for reinforcing the corners.
When a large top case is installed at the same time, the hinge can be opened and the top cover can be slid open and closed.
In addition, by completely removing the top cover, you can carry a large load that protrudes from the case.
Removable top cover.
Includes 1 set of Same key & cylinder for top case.
This makes it possible to use the same key for triple installation.
Peringatan
* Direkomendasikan 3 kg berikut dengan mempertimbangkan kemampuan manuver di Daytona.
* Setiap kendaraan memerlukan dudukan pannier camshaft secara terpisah saat dipasang di badan kendaraan.
* Ini tidak menerapkan perlakuan permukaan seni aluminium untuk memberikan tekstur materialnya sendiri.
* Harap perhatikan goresan pada konten produk karena ini adalah casing logam. *DAYTONA recommends less than 3kg load (one side) for maneuverability.
*Cam pannier holder is required for installation on the vehicle.
*The surface of the aluminum part has not been treated to give the original texture of the material.
*The case is made of metal and may damage the stored items.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
* Setiap kendaraan memerlukan dudukan pannier camshaft secara terpisah saat dipasang di badan kendaraan.
* Ini tidak menerapkan perlakuan permukaan seni aluminium untuk memberikan tekstur materialnya sendiri.
* Harap perhatikan goresan pada konten produk karena ini adalah casing logam. *DAYTONA recommends less than 3kg load (one side) for maneuverability.
*Cam pannier holder is required for installation on the vehicle.
*The surface of the aluminum part has not been treated to give the original texture of the material.
*The case is made of metal and may damage the stored items.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/