- Beranda
- Motor
- DUCATI 1001cc -
- STREETFIGHTER V4 S
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Alternator Cover / Generator Cover
- AELLA
- AELLA: Pelindung Tutup Generator
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
STREETFIGHTER V4 S -24
PANIGALE V4 S ALL MODEL
STREETFIGHTER V4 -24
PANIGALE V4 ALL MODEL
Tampilkan lebih banyak
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Warna : Keras Anodized
Panigale V4 / Sisi Kiri Color: hard anodizing
Panigale V4 / left side
Panigale V4 / Sisi Kiri Color: hard anodizing
Panigale V4 / left side
[Deskripsi]
Menjaga bak mesin magnesium dengan aman.
Crankcase Panigale V4 terbuat dari magnesium untuk mengurangi bobot.
Pelindung AELLA terbuat dari aluminium mesin (A2017) dengan anodisasi keras untuk meningkatkan kekuatan permukaan, dan warna uniknya cocok dengan warna penutup magnesium ..
Warnanya seperti champagne gold, tapi warnanya anodized, jadi tidak pudar karena panas atau sinar UV ..
Bentuk adalah aspek terpenting dari desain, dan dirancang setipis mungkin ..
Ketebalan dinding maksimum adalah 6mm, dengan maksimum 2.5mm pada titik-titik di mana tidak ada beban yang diberikan ..
Bagian dalam penutup dilapisi dengan karet fluoroplastik tahan panas untuk melembutkan benturan casing jika terjatuh ..
Manfaat lainnya
Dapat digunakan dengan penggeser mesin AELLA.
Pemasangan juga dapat dilakukan dengan hanya melepas penutup bawah ..
Securely guards the magnesium crankcase.
The crankcase of the Panigale V4 is made of magnesium to reduce the weight, and if it is damaged during a fall, such as a fall from a standing start, it will require expensive replacement.
AELLA guard is made of machined aluminum (A2017 material) and hard anodized to increase surface strength, and its unique color matches the magnesium cover.
The color is like champagne gold, but it is uncolored anodized aluminum, so it does not fade due to heat or ultraviolet rays.
The shape is the most important part of the design, so that the thickness (protrusion) does not appear as much as possible.
The maximum thickness of the wall is 6mm, and 2.5mm at the point where there is no burden.
The inside of the cover is covered with heat-resistant fluorine resin rubber to soften the impact on the case in the event of a fall.
○Other benefits
・This product can be used with AELLA engine sliders.
・Installation can be done by simply removing the lower cowl, and it takes only a few minutes for the product to be installed.
Crankcase Panigale V4 terbuat dari magnesium untuk mengurangi bobot.
Pelindung AELLA terbuat dari aluminium mesin (A2017) dengan anodisasi keras untuk meningkatkan kekuatan permukaan, dan warna uniknya cocok dengan warna penutup magnesium ..
Warnanya seperti champagne gold, tapi warnanya anodized, jadi tidak pudar karena panas atau sinar UV ..
Bentuk adalah aspek terpenting dari desain, dan dirancang setipis mungkin ..
Ketebalan dinding maksimum adalah 6mm, dengan maksimum 2.5mm pada titik-titik di mana tidak ada beban yang diberikan ..
Bagian dalam penutup dilapisi dengan karet fluoroplastik tahan panas untuk melembutkan benturan casing jika terjatuh ..
Manfaat lainnya
Dapat digunakan dengan penggeser mesin AELLA.
Pemasangan juga dapat dilakukan dengan hanya melepas penutup bawah ..
Securely guards the magnesium crankcase.
The crankcase of the Panigale V4 is made of magnesium to reduce the weight, and if it is damaged during a fall, such as a fall from a standing start, it will require expensive replacement.
AELLA guard is made of machined aluminum (A2017 material) and hard anodized to increase surface strength, and its unique color matches the magnesium cover.
The color is like champagne gold, but it is uncolored anodized aluminum, so it does not fade due to heat or ultraviolet rays.
The shape is the most important part of the design, so that the thickness (protrusion) does not appear as much as possible.
The maximum thickness of the wall is 6mm, and 2.5mm at the point where there is no burden.
The inside of the cover is covered with heat-resistant fluorine resin rubber to soften the impact on the case in the event of a fall.
○Other benefits
・This product can be used with AELLA engine sliders.
・Installation can be done by simply removing the lower cowl, and it takes only a few minutes for the product to be installed.
Peringatan
* Ini menyebabkan sedikit perbedaan warna tergantung pada banyak anodized. Mungkin tidak persis sama dengan warna di kiri dan kanan.
*Depending on the lot of anodized aluminum, there will be a slight difference in color.The color may not be exactly the same on both sides.
Model yang Sesuai
STREETFIGHTER V4 S -24
PANIGALE V4 S ALL MODEL
STREETFIGHTER V4 -24
PANIGALE V4 ALL MODEL
Tampilkan lebih banyak
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/