- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- GPZ900R Ninja
- Sparepart Motor
- Bodywork
- Jok & Aksesoris
- Sparepart Jok Lainnya
- K-FACTORY
- K-FACTORY: Kunci Jok Silinder
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan : DURACON
Material: Made of Duracon®
[Deskripsi]
Jika kunci kursi tidak dapat dibuka dan ditutup dengan mulus lagi, ini adalah bagian yang perlu Anda periksa!
Silinder kunci kursi GPZ900R dijual terpisah ..
Alasan mengapa kunci kursi tidak dapat dibuka dan ditutup dengan mulus sebagian besar disebabkan oleh keausan bagian ini ..
Silakan periksa bagian ini di dalam silinder kunci pengunci kursi !.
Tetapi Anda tidak bisa mendapatkan suku cadang asli dengan sendirinya. Itulah mengapa kami menggunakan DURACON untuk bahan dan mengerjakannya dengan presisi tinggi ..
Sisi silinder kunci sedikit lebih tebal dari stok dan kami telah membuat penyok di samping untuk menahan gemuk dan cincin-O ..
Ini juga tersedia untuk ZEPHYR750. If you can't open and close the seat lock smoothly, this is the part you need to check!
Cylinder for GPZ900R seat lock.
If the seat lock does not open and close smoothly, it is most likely due to wear and tear or cracking of this part over time.
Please have a look at this part in the seat lock key cylinder.
However, OEM parts are not available for this resin part by itself!The material used for the body is Duracon®, which is machined to a high precision.
The key cylinder side is a little thicker than the stock one, and there is a recess on the side for the grease to bracket, and an O-ring is installed.
Can be used on ZEPHYR750.
Silinder kunci kursi GPZ900R dijual terpisah ..
Alasan mengapa kunci kursi tidak dapat dibuka dan ditutup dengan mulus sebagian besar disebabkan oleh keausan bagian ini ..
Silakan periksa bagian ini di dalam silinder kunci pengunci kursi !.
Tetapi Anda tidak bisa mendapatkan suku cadang asli dengan sendirinya. Itulah mengapa kami menggunakan DURACON untuk bahan dan mengerjakannya dengan presisi tinggi ..
Sisi silinder kunci sedikit lebih tebal dari stok dan kami telah membuat penyok di samping untuk menahan gemuk dan cincin-O ..
Ini juga tersedia untuk ZEPHYR750. If you can't open and close the seat lock smoothly, this is the part you need to check!
Cylinder for GPZ900R seat lock.
If the seat lock does not open and close smoothly, it is most likely due to wear and tear or cracking of this part over time.
Please have a look at this part in the seat lock key cylinder.
However, OEM parts are not available for this resin part by itself!The material used for the body is Duracon®, which is machined to a high precision.
The key cylinder side is a little thicker than the stock one, and there is a recess on the side for the grease to bracket, and an O-ring is installed.
Can be used on ZEPHYR750.
Peringatan
*Duracon® is a registered trademark of Polyplastics Corporation in Japan and other countries.
*There may be changes in product specifications due to the manufacturer's reasons. *Duracon® is a registered trademark of Polyplastics Corporation in Japan and other countries.
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be changes in product specifications due to the manufacturer's reasons. *Duracon® is a registered trademark of Polyplastics Corporation in Japan and other countries.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/