- Beranda
- Motor
- SUZUKI 126 - 250cc
- GSX-R150
- Sparepart Motor
- Bodywork
- Jok & Aksesoris
- Single Seat Cowl
- SAITANIYA
- SAITANIYA: Jok Single Racing
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Permukaan jok -20mm
[Termasuk]
Seat cowl body
Back plate
Dudukan jok
Bracket
Karet jok
Baut Seat surface -20mm design
[Included]
Seat cowl body
Back plate
Seat stand
Seat bracket
Seat rubber
Screws
[Termasuk]
Seat cowl body
Back plate
Dudukan jok
Bracket
Karet jok
Baut Seat surface -20mm design
[Included]
Seat cowl body
Back plate
Seat stand
Seat bracket
Seat rubber
Screws
[Deskripsi]
Sisi belakangnya dilapisi kain kaca, tapi "tertutup noda".
Permukaan tempat duduk selesai rata.
Sisi depan jok sedikit lebih lebar, jadi permukaan jok lebih rendah, tapi pijakannya hampir sama dengan OEM.
Bagi yang ingin membelinya dengan harga lebih murah, kami menetapkannya sebagai "unbuffed".
Harap aplikasikan cat karena perawatan permukaan belah masih dalam keadaan kasar.
Yang "digosok" mengkilap.
Ini dapat digunakan apa adanya, tetapi karena lapisan gel putih dan hitam adalah "lapisan gel", pada dasarnya ini adalah produk prasyarat untuk pengecatan.
• Tanpa Buffing : Lukisan diperlukan
• Digosok (Digosok sebelumnya) : Kusam dan berkilau. Ini juga tersedia apa adanya. The back side is finished with glass cloth, but is "spot-lined".
The seat is flat.
Because the front side of the seat is a little wider, the seat is lower, but the footing is about the same as stock.
For those who want to buy at a lower price, SAITANIYA has set up the "No Buffing" option.
Since the split surface is still in the rough-hewn state, it should be painted.
Pre-buffed one has a gloss finish.
Although it can be used as it is, both white gelcoat and black gelcoat are "gelcoat", so it is basically a product to be painted.
■No buffing: painting required
■Pre-Buffed: It looks glossy.This product can be used as is.
Permukaan tempat duduk selesai rata.
Sisi depan jok sedikit lebih lebar, jadi permukaan jok lebih rendah, tapi pijakannya hampir sama dengan OEM.
Bagi yang ingin membelinya dengan harga lebih murah, kami menetapkannya sebagai "unbuffed".
Harap aplikasikan cat karena perawatan permukaan belah masih dalam keadaan kasar.
Yang "digosok" mengkilap.
Ini dapat digunakan apa adanya, tetapi karena lapisan gel putih dan hitam adalah "lapisan gel", pada dasarnya ini adalah produk prasyarat untuk pengecatan.
• Tanpa Buffing : Lukisan diperlukan
• Digosok (Digosok sebelumnya) : Kusam dan berkilau. Ini juga tersedia apa adanya. The back side is finished with glass cloth, but is "spot-lined".
The seat is flat.
Because the front side of the seat is a little wider, the seat is lower, but the footing is about the same as stock.
For those who want to buy at a lower price, SAITANIYA has set up the "No Buffing" option.
Since the split surface is still in the rough-hewn state, it should be painted.
Pre-buffed one has a gloss finish.
Although it can be used as it is, both white gelcoat and black gelcoat are "gelcoat", so it is basically a product to be painted.
■No buffing: painting required
■Pre-Buffed: It looks glossy.This product can be used as is.
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*Harus memotong back plate bawaan (ABS). Setelah dipotong, lampu belakang tidak bisa dipasang.
*Anda bisa memasang lampu belakang lagi jika membeli back plate OEM.
*Gel coat adalah dasar cat untuk pewarnaan berikutnya. Produk ini memang harus dicat ulang sendiri. Ada kemungkinan cat bisa tercampur dengan warna dasar atau permukaannya mungkin terlihat pecah sesudah dicat.
*Foto mungkin memuat produk dalam tipe atau warna lain.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. It is necessary to cut the stock back plate (ABS part). After cutting, the tail lamp can not be installed.
*You can install the tail lamp again if you buy the stock back plate (ABS part) again.
*About the gelcoat
The gelcoat is the "base" of the paint. Since each color is set, other colors may be mixed in.
This product is designed to be painted, so there is a possibility that other colors may be mixed in, or the surface of the ground may show through when the split surface is finished (polished).
*The image includes other types and coloring.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Anda bisa memasang lampu belakang lagi jika membeli back plate OEM.
*Gel coat adalah dasar cat untuk pewarnaan berikutnya. Produk ini memang harus dicat ulang sendiri. Ada kemungkinan cat bisa tercampur dengan warna dasar atau permukaannya mungkin terlihat pecah sesudah dicat.
*Foto mungkin memuat produk dalam tipe atau warna lain.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. It is necessary to cut the stock back plate (ABS part). After cutting, the tail lamp can not be installed.
*You can install the tail lamp again if you buy the stock back plate (ABS part) again.
*About the gelcoat
The gelcoat is the "base" of the paint. Since each color is set, other colors may be mixed in.
This product is designed to be painted, so there is a possibility that other colors may be mixed in, or the surface of the ground may show through when the split surface is finished (polished).
*The image includes other types and coloring.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/