- Beranda
- Motor
- YAMAHA 751 - 1000cc
- MT-09 (FZ-09)
- Aksesoris
- Box Sepeda Motor
- Bracket Box Motor
- GIVI
- GIVI: Bracket Box Special [SR1161]
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Khusus untuk behel motor OEM
Box yang sesuai: Monokey,Mono-lock
Beban maksimum (Monokey): 6kg
[Produk khusus yang bisa dipakai bersamaan]
•Monokey: M5 Base
•Mono-lock: M5M Base Exclusive to OEMGrab RailCarrier
Support Top case:Monokey,Mono-lock
Largest load weight (Monokey top case):6kg
[specified items installed at the same time]
・Monokey:M5Base
・Mono-lock:M5MBase
Box yang sesuai: Monokey,Mono-lock
Beban maksimum (Monokey): 6kg
[Produk khusus yang bisa dipakai bersamaan]
•Monokey: M5 Base
•Mono-lock: M5M Base Exclusive to OEMGrab RailCarrier
Support Top case:Monokey,Mono-lock
Largest load weight (Monokey top case):6kg
[specified items installed at the same time]
・Monokey:M5Base
・Mono-lock:M5MBase
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*Lepas dan pasang kembali reflektor bawaan.
*Anda mungkin perlu membuat lubang di bagian dalam cover samping.
*Hati-hati membuat bagian dalam cover baret.
*Penting untuk mengubah posisi lampu belakang untuk menyesuaikan posisinya.
*Fitting dari GIVI dan Daytona tidak untuk digunakan untuk box selain dari Givi.
*Produk mungkin memiliki ketidasamaan dalam warna, bekas las, goresan, dll karena proses pembuatan dan pengiriman.
*Pasang ke mekanik atau bengkel untuk menghindari box berbenturan dengan cowl atau hal yang tidak diinginkan lainnya.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. *Remove and install the stock reflector.
*It is necessary to drill holes in the stock side inner cover.
*Please be careful not to scratch the genuine side inner cover.
*It is necessary to extend the wiring with the attached parts to change the position of the stock rear turn signal.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases. Daytona and GIVI cannot be held responsible under any circumstances for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, distortions, etc. due to product materials, manufacturing methods, individual product differences, overseas transportation conditions, etc. Please understand beforehand.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility. It is recommended that each part be temporarily fastened and finally tightened while observing the condition.
*Please note that the product specification may change due to manufacturer reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Anda mungkin perlu membuat lubang di bagian dalam cover samping.
*Hati-hati membuat bagian dalam cover baret.
*Penting untuk mengubah posisi lampu belakang untuk menyesuaikan posisinya.
*Fitting dari GIVI dan Daytona tidak untuk digunakan untuk box selain dari Givi.
*Produk mungkin memiliki ketidasamaan dalam warna, bekas las, goresan, dll karena proses pembuatan dan pengiriman.
*Pasang ke mekanik atau bengkel untuk menghindari box berbenturan dengan cowl atau hal yang tidak diinginkan lainnya.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan. *Remove and install the stock reflector.
*It is necessary to drill holes in the stock side inner cover.
*Please be careful not to scratch the genuine side inner cover.
*It is necessary to extend the wiring with the attached parts to change the position of the stock rear turn signal.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases. Daytona and GIVI cannot be held responsible under any circumstances for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, distortions, etc. due to product materials, manufacturing methods, individual product differences, overseas transportation conditions, etc. Please understand beforehand.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility. It is recommended that each part be temporarily fastened and finally tightened while observing the condition.
*Please note that the product specification may change due to manufacturer reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/