- Beranda
- Sparepart Motor
- Knalpot
- Knalpot Slip-on
- CF POSH
- CF POSH: Baffle Knalpot Cut-out Duralumin
Baffle Knalpot Cut-out Duralumin
- Nomor produk: 801650-52
-
- IN STOCK
- Out Stock
-
- |
- 5.0
- (1 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
EX-Diameter Lubang Baffle:Φ30
◆EX-Baffle Hole Diameter: Φ30
[Deskripsi]
Pada kendaraan uji CF POSH, penggunaan Silencer Baffle mengurangi volume sekitar 10%.
Tersedia 3 jenis Tail Pipe untuk diameter luar Φ52,Φ54,Φ60.5.
Itu dapat menyisipkan antara pipa ekor dan peredam ...
Panjang keseluruhan 27mm (Panjang flensa 5mm) In the CF POSH test vehicle, the volume was reduced by approximately 10% when used in conjunction with the silencer baffle.
●Three types of tailpipes for Φ52, Φ54, Φ60.5 are lined up.
●Just insert it between the tail pipe and the silencer.
●Total length 27 mm (flange length: 5 mm)
Tersedia 3 jenis Tail Pipe untuk diameter luar Φ52,Φ54,Φ60.5.
Itu dapat menyisipkan antara pipa ekor dan peredam ...
Panjang keseluruhan 27mm (Panjang flensa 5mm) In the CF POSH test vehicle, the volume was reduced by approximately 10% when used in conjunction with the silencer baffle.
●Three types of tailpipes for Φ52, Φ54, Φ60.5 are lined up.
●Just insert it between the tail pipe and the silencer.
●Total length 27 mm (flange length: 5 mm)
Peringatan
* Tergantung pada strukturnya, peredam tidak dapat digunakan. Pastikan untuk memeriksa sebelum digunakan.
* Posisi pemasangan silencer akan turun 5mm di garis belakang.
* Harap pastikan untuk menggunakan SUS yang dibuat (suhu tahan panas sekitar 1400 derajat) ketika suhu knalpot di sekitar sekat menjadi 600 derajat atau lebih karena dapat menyebabkan kerusakan larut.
* Harap dicatat bahwa pengurangan keluaran karena peningkatan tahanan buang.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*It may not be used depending on the structure of the silencer.Please check the structure of the silencer carefully before use.
*The mounting position of the silencer will be lowered 5mm on the rear line.
*If the exhaust temperature around the baffle is over 600°C, be sure to use SUS baffles (heat-resistant temperature: approx. 1400°C) because they may be damaged by melting.
*Please note that the power output will decrease due to the increase of exhaust resistance.
*There may be changes in product specifications due to the manufacturer's reasons.
* Posisi pemasangan silencer akan turun 5mm di garis belakang.
* Harap pastikan untuk menggunakan SUS yang dibuat (suhu tahan panas sekitar 1400 derajat) ketika suhu knalpot di sekitar sekat menjadi 600 derajat atau lebih karena dapat menyebabkan kerusakan larut.
* Harap dicatat bahwa pengurangan keluaran karena peningkatan tahanan buang.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*It may not be used depending on the structure of the silencer.Please check the structure of the silencer carefully before use.
*The mounting position of the silencer will be lowered 5mm on the rear line.
*If the exhaust temperature around the baffle is over 600°C, be sure to use SUS baffles (heat-resistant temperature: approx. 1400°C) because they may be damaged by melting.
*Please note that the power output will decrease due to the increase of exhaust resistance.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/