- Beranda
- Motor
- YAMAHA 751 - 1000cc
- MT-09 (FZ-09)
- Sparepart Motor
- Sparepart Stang & Kemudi
- Stang
- EFFEX
- EFFEX: Easy Fit Bar Plus
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Tipe]
•Tipe taper
[Bahan]
•Aluminium
[Posisi]
•7mm Naik
•11mm Mundur
[Spek]
•Finishing aluminium anodasi
•Diameter luar stang (bagian klem): Φ28.6
•Diameter luar stang (bagian grip): Φ22.2
•Diameter dalam (bagian grip): Φ14
•Lubang saklar non-turnover
[Size]
Up-down (dibandingkan dengan standar): +7mm
Lebar (dibandingkan dengan standar): +2mm
Pull-back (dibandingkan dengan standar): -1.5 derajat
Lebar: 736mm
Tinggi: 43mm
Pull: 113mm
Sudut stang: 23 derajat
Sudut standing: 64 derajat
[Type]
・Taper type
[Material]
・Aluminum
[movement]
・7mmUP
・11mmBACK
[Specification]
・Anodized aluminum finish
・Handle outer diameter (clamp section): Φ28.6
・Handle outer diameter (grip section): Φ22.2
・Handle inner diameter (grip section): Φ14
・Non-turnover hole machining of switch box
[Size]
Up-down (compared to stock): +7mm
Width (compared to stock): +2mm
Pull-back angle (compared to stock): -1.5 degrees
Width: 736mm
Height: 43mm
Pull: 113mm
Aperture Angle: 23 degrees
Standing angle: 64 degrees
•Tipe taper
[Bahan]
•Aluminium
[Posisi]
•7mm Naik
•11mm Mundur
[Spek]
•Finishing aluminium anodasi
•Diameter luar stang (bagian klem): Φ28.6
•Diameter luar stang (bagian grip): Φ22.2
•Diameter dalam (bagian grip): Φ14
•Lubang saklar non-turnover
[Size]
Up-down (dibandingkan dengan standar): +7mm
Lebar (dibandingkan dengan standar): +2mm
Pull-back (dibandingkan dengan standar): -1.5 derajat
Lebar: 736mm
Tinggi: 43mm
Pull: 113mm
Sudut stang: 23 derajat
Sudut standing: 64 derajat
[Type]
・Taper type
[Material]
・Aluminum
[movement]
・7mmUP
・11mmBACK
[Specification]
・Anodized aluminum finish
・Handle outer diameter (clamp section): Φ28.6
・Handle outer diameter (grip section): Φ22.2
・Handle inner diameter (grip section): Φ14
・Non-turnover hole machining of switch box
[Size]
Up-down (compared to stock): +7mm
Width (compared to stock): +2mm
Pull-back angle (compared to stock): -1.5 degrees
Width: 736mm
Height: 43mm
Pull: 113mm
Aperture Angle: 23 degrees
Standing angle: 64 degrees
[Deskripsi]
■Exclusive design for each model/Standard brake hose, throttle cable, clutch cable and wiring can be used without modification.
[About Plus]
The handlebars are 30mm shorter in width than the stock handlebars, and the additional 2 degrees of pull-back angle allows for a more relaxed position with more arm room.
■Exclusive design for each model/Standard brake hose, throttle cable, clutch cable and wiring can be used without modification.
[About Plus]
The handlebars are 30mm shorter in width than the stock handlebars, and the additional 2 degrees of pull-back angle allows for a more relaxed position with more arm room.
[About Plus]
The handlebars are 30mm shorter in width than the stock handlebars, and the additional 2 degrees of pull-back angle allows for a more relaxed position with more arm room.
■Exclusive design for each model/Standard brake hose, throttle cable, clutch cable and wiring can be used without modification.
[About Plus]
The handlebars are 30mm shorter in width than the stock handlebars, and the additional 2 degrees of pull-back angle allows for a more relaxed position with more arm room.
Peringatan
*Tidak bisa menggunakan jalu stang bawaan di motor MT-09.
*Pakai jalu stang untuk stang dengan diameter dalam 14mm.
*Bisa memakai jalu stang EFFEX.
*Pastikan saat memasang logo EFFEX tepat berada di tengah.
*Foto mungkin memuat produk lain.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Stock bar ends cannot be used with MT-09.
*Bar end corresponding to handlebar inner diameter Φ14 is separately required.
*EFFEX handlebar weight series is recommended.
*Install it so that the EFFEX logo is centered.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Pakai jalu stang untuk stang dengan diameter dalam 14mm.
*Bisa memakai jalu stang EFFEX.
*Pastikan saat memasang logo EFFEX tepat berada di tengah.
*Foto mungkin memuat produk lain.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Stock bar ends cannot be used with MT-09.
*Bar end corresponding to handlebar inner diameter Φ14 is separately required.
*EFFEX handlebar weight series is recommended.
*Install it so that the EFFEX logo is centered.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/