Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Size:300X210mm (thickness:approx. 0.5mm)
Material:AluminumA1100 (melting temperature:about 650°C)
surface processing:Embossed hemisphere surface/Color anodized aluminum surface
Material:AluminumA1100 (melting temperature:about 650°C)
surface processing:Embossed hemisphere surface/Color anodized aluminum surface
[Deskripsi]
Plus" was added to the name of the product because it is a material designed to promote radiation and heat dissipation of the heat emitted, but also because of its properties as a 0.5mm-thick aluminum material and its ability to create workpieces using the structural performance of its embossed surface. Plus" is added to the product name..
Choice of two Anodized Colors.
■Special Molded Aluminum Plate (A1100)
This material is designed to promote heat shielding and dispersed heat dissipation due to its concave-convex shape and excellent thermal conductivity of aluminum..
Easy to cut with scissors and bend by hand..
Universally applicable for heat damage prevention such as under cowl and electrical components..
Anodized treatment has also been applied to improve corrosion and wear resistance..
Black and Color:GrayCollar are available, which are easy to blend in with the vehicle and create a cohesive look, instead of Silver, which used to stand out in the conventional One Point..
When used in close contact with HeatSpot (heat source)
This product conducts heat when it is placed in close contact with a heat source, and the spherical Emboss surface, which has a larger surface area than a flat surface, allows heat to escape to the open air..
It acts as a heat dissipation material, and the larger the area used for a large HeatSpot, the more effective it is..
When installed with a space in the HeatSpot (heat source)
This product reflects (radiates) the heat emitted from the heat source by the Red external radiation and dissipates it while reducing the heat transmitted to the outside of the source as radiation material..
■Tools for processing
・Scissors(Cut)
Gold cut Scissors(Cut)
Hand bender (bending)
Drill
Gold File (with EdgeBALI)
Rivets (joints)
Gloves/Protective Glasses
Choice of two Anodized Colors.
■Special Molded Aluminum Plate (A1100)
This material is designed to promote heat shielding and dispersed heat dissipation due to its concave-convex shape and excellent thermal conductivity of aluminum..
Easy to cut with scissors and bend by hand..
Universally applicable for heat damage prevention such as under cowl and electrical components..
Anodized treatment has also been applied to improve corrosion and wear resistance..
Black and Color:GrayCollar are available, which are easy to blend in with the vehicle and create a cohesive look, instead of Silver, which used to stand out in the conventional One Point..
When used in close contact with HeatSpot (heat source)
This product conducts heat when it is placed in close contact with a heat source, and the spherical Emboss surface, which has a larger surface area than a flat surface, allows heat to escape to the open air..
It acts as a heat dissipation material, and the larger the area used for a large HeatSpot, the more effective it is..
When installed with a space in the HeatSpot (heat source)
This product reflects (radiates) the heat emitted from the heat source by the Red external radiation and dissipates it while reducing the heat transmitted to the outside of the source as radiation material..
■Tools for processing
・Scissors(Cut)
Gold cut Scissors(Cut)
Hand bender (bending)
Drill
Gold File (with EdgeBALI)
Rivets (joints)
Gloves/Protective Glasses
Peringatan
*If you want to block the heat, do not attach it directly to the heat source, but be sure to open a gap between the heat source and the product.
*Radiant heat may accumulate due to processing shape and installation method.
*Metal scissors are recommended.
*This product is anodized to form a film that is more resistant to corrosion than normal.
*Cracks, chips and discoloration may partially appear in the film due to processing or high heat.
*Repeated bending or bending more than 90 degrees may cause surface cracks or damage.
*Please be careful not to get alkaline detergents, etc. on this product.
*Always wear gloves when handling this product, not just when cutting.
*For bending, freehand is OK for large straight bends, but a sheet metal bender or square timber as shown in the image would be useful.
*After cutting, please remove burrs with a metal file. Do not use sandpaper as it is dangerous.
*Please note that repeated bending of more than 90 degrees may result in the exposure of the folded surface or breakage.
*Other colors and products may be included in the image.
*Please note that the product specification may change due to manufacturer reasons.
*Radiant heat may accumulate due to processing shape and installation method.
*Metal scissors are recommended.
*This product is anodized to form a film that is more resistant to corrosion than normal.
*Cracks, chips and discoloration may partially appear in the film due to processing or high heat.
*Repeated bending or bending more than 90 degrees may cause surface cracks or damage.
*Please be careful not to get alkaline detergents, etc. on this product.
*Always wear gloves when handling this product, not just when cutting.
*For bending, freehand is OK for large straight bends, but a sheet metal bender or square timber as shown in the image would be useful.
*After cutting, please remove burrs with a metal file. Do not use sandpaper as it is dangerous.
*Please note that repeated bending of more than 90 degrees may result in the exposure of the folded surface or breakage.
*Other colors and products may be included in the image.
*Please note that the product specification may change due to manufacturer reasons.
