[Closeout Product]Wheel Mounting AssistTool 15mmShaftfor Vehicle[special price].

Nomor produk: KITA-T2-01
- NEW
- IN STOCK
- Out Stock

Rp430,000

*Termasuk PPN

Webike Points: +4,300 Points

Alamat Pengiriman

Mohon tunggu...

to DKI Jakarta, Jakarta Selatan, Cilandak

UBAH

Pilih Alamat

Biaya pengiriman Rp10,000

Cek kupon saya

Jumlah

100% Ori Garansi 7 hr Gratis Cashback Nett Tanpa Biaya Tambahan

Model yang Sesuai

Lihat Semua

XT250X For 15mm shaft cars/both front and rear wheels SEROW225 For 15mm shaft cars/both front and rear wheels SEROW250 For 15mm shaft cars/both front and rear wheels XG250 TRICKER For 15mm shaft cars/both front and rear wheels

Tampilkan lebih banyak

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

Spesifikasi:

control number:24627214
15mmShaftfor VehicleSEROW225 250 XG250 TRICKER XT250Xetc. (both) front and rear wheels

[Deskripsi]

It is easy to use for the shaft diameter of each specification, but it can also be used for Axle Shaft of larger thickness for other models..
Please check the shaft diameter by yourself..
Reduces the time and effort required for maintenance and puncture when installing the wheel.. Prevents the Collar from falling off and shortens the time the Wheel is lifted..

Please refer to the video for how to use it..
If you have ever removed the Wheel, you will understand the convenience and the reduction of trouble..
The installation method varies depending on the car model, but the video is for SEROW etc.. regarding.

It is standard to put the shaft from the LeftSprocket side for the Rear wheel of SEROW225. 250 is standard to put the shaft from the RightBrake Disc side. I think it makes sense to put the shaft in from the Left side so that the bulge of the NailCam is on top of the shaft.. Tighten the Nut and assemble it in the direction that NailCam does not bite and loosen, and you can assemble it firmly..

Photo Description
1,Material is made by DURACON® Cut-out. It is a kind of high strength engineering plastic. It's so strong that it won't be damaged by hanging the Wheel.. It weighs about half an egg..
2,For Left12mm,For Right15mm.
3,First, insert the Tool from the Brake Disc side and widen the gap between the Brake Pads "if necessary"..
Remove the Sprocket side Collar from the Wheel..
4,Before attaching the Wheel, pull the Tool out to the position where it cannot be seen inside..
Bring the Wheel to the designated position and insert the Tool as far as it protrudes.. You can fit Chain at this time..
5,Attach the collar on the Sprocket side, insert the shaft, and insert it vigorously from the middle to pull out the tool.. Adjust the NailCam according to the chain condition and tighten the nut..
RearLeftNutSpec.. Spread more Pad.. Remove the Right Side Collar.
6,Insert the Tool from the Sprocket side.
Fit the right side collar and insert the shaft..
7,Pong!.
Front(RightNutSpec towards. /)replacement parts. Remove the Left Side (Right Side) Collar and insert the Tool while adjusting the angle of the Meter cable exit of the Right Collar..
8,Left Side Collar is fitted..
We'll start with Left and work our way to Shaft..
bang.

In both cases, the collar on the shaft insertion side is fitted when inserting the shaft.. It won't go down..
Timings to fit Chain to Sprocket should be done after NailCam if you can pull Large enough, or before Shaft if you can't pull much..
When driving on rough roads, it is easy to hit a rock if the NailCam is protruding below.. Tighten the Nut and tighten it in the direction that the NailCam bites..
Do it a few times and you'll know the hang.. I'm sure there are other ways to do it.. You'll have to be creative..
Gentle on the waist, heavy on the arm PullPull, Collar falls and PullPull in anger. I think it's hard to do..

Peringatan

*Please note that there are cases wherein it has some scratches, dirt and etc. in the package of the outlet sale corresponding product.
*The outlet sale product are subjected to availability. It is impossible to purchase the product in case it is already out of stock.
*The product contents of the outlet sale is subjected to change without prior notice.

*DURACON & REG; is a registered trademark of Polyplastics Corporation in Japan and other countries.
*The product on the photo may contain other sizes.

*Please note that the product specification may change due to manufacturer reasons.

Model yang Sesuai

Tampilkan lebih banyak

Link Laman Model

YAMAHA

[Closeout Product]Wheel Mounting AssistTool 15mmShaftfor Vehicle[special price].

Model yang Sesuai

Rincian Produk

Spesifikasi:

[Deskripsi]

Peringatan

Model yang Sesuai

Link Laman Model

PRODUK YANG JUGA DILIHAT

Produk Siap Dikirim dari Gudang Jepang

Rekomendasi buat Kamu

Best Seller

Produk Teratas

New Custom Article

Gunakan kupon

Review Gambar

Review detail