- Beranda
- Motor
- HONDA 51 - 125cc
- NSR80
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- High Throttle Kit
- DAYTONA
- DAYTONA: High Slow Kit Fuel Mix
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Untuk motor 2 tak dengan karburetor besar mix
Panjang luar: 870mm
Take up R: 29mm
Tipe ujung terbuka For bikes using 2-stroke mixed big carburetor
Outer length: 870mm
Take up R: 29mm
Through-end type
Panjang luar: 870mm
Take up R: 29mm
Tipe ujung terbuka For bikes using 2-stroke mixed big carburetor
Outer length: 870mm
Take up R: 29mm
Through-end type
[Deskripsi]
Kit throttle super tinggi dirancang dengan tingkat pengambilan ideal untuk karburator besar Φ20-Φ28.
Untuk karburator Φ28, diperlukan putaran sekitar 55 derajat untuk membuka lebar throttle. Super high throttle kit designed for optimum take-up for big cabs from Φ20-Φ28.
In the case of Φ28 carburetor, it can be fully opened by about 55 degrees of rotation.
Untuk karburator Φ28, diperlukan putaran sekitar 55 derajat untuk membuka lebar throttle. Super high throttle kit designed for optimum take-up for big cabs from Φ20-Φ28.
In the case of Φ28 carburetor, it can be fully opened by about 55 degrees of rotation.
Catatan
Cek manual pemasangan di sini
Cek sparepart di sini.
Cek sparepart di sini.
Here is the instruction manual
Repair parts are here.
Repair parts are here.
Peringatan
Setelah memasang produk ini, perlu menguras oli dari oil pump dan halangi intake oli di sisi manifold karburator.
*Ketika menggunakan produk ini untuk NSR50 dan NS-1, bisa menggunakan karburator bawaan dan karburator besar Daytona.
*Ketika menggunakan produk ini di TZR50/R dan TZM50R, perlu mengganti karburator dengan karburator besar karena panjang kabelnya tidak cukup untuk karburator bawaan. After installing the product, it is necessary to drain the oil in the oil pump and seal the oil intake of the carb manifold side.
*When using this product for the NSR50 and NS-1, it can be used for both the stock carb and the DAYTONA big carb kit.
*When used on the TZR50/R and TZM50R, the cable length is not long enough for the stock carb, so it must be replaced with a big carb.
*Ketika menggunakan produk ini untuk NSR50 dan NS-1, bisa menggunakan karburator bawaan dan karburator besar Daytona.
*Ketika menggunakan produk ini di TZR50/R dan TZM50R, perlu mengganti karburator dengan karburator besar karena panjang kabelnya tidak cukup untuk karburator bawaan. After installing the product, it is necessary to drain the oil in the oil pump and seal the oil intake of the carb manifold side.
*When using this product for the NSR50 and NS-1, it can be used for both the stock carb and the DAYTONA big carb kit.
*When used on the TZR50/R and TZM50R, the cable length is not long enough for the stock carb, so it must be replaced with a big carb.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/