Strong Type Diagonal Nipper (Bent Type) (SB)

  • Product number: 7421-200
    • IN STOCK
    • Out Stock

Rp818,000

*VAT included

Webike Points: +8,180 Points

Delivery information

  • Please wait...
to Jakarta, South Jakarta, Cilandak
CHANGE
Select address
Shipping Fee Rp10,000
Check my coupons

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Product Detail

Specification:

Cutting capacity (soft wire; Φmm):>4.0
Cutting capacity (medium-hard wire; Φmm):4.2
Cutting capacity (hard wire; Φmm):3
Cutting capacity (piano wire; Φmm):2.5
Head Finish: Polish
Handle Specifications: Plastic Coating
Head: 12 Degree Angle
Length (mm): 200
Weight (g): 260

[Description]

The joint is made of forged shaft caulking for superior durability.Suitable for cutting a variety of wires including piano wire.The optimal blade position and angle, the design that maximizes the leverage principle, and the ergonomic shape of the handle - these three advantages allow for high cutting performance with low effort.The hardness of the blade, which has undergone careful quenching treatment, is approximately HRC64.5.Material is oil quenched and tempered chrome vanadium electrical steel.The head has a 12-degree angle and a clearance of about 70mm to allow easy work on a flat surface.
The joint is made of forged shaft caulking for superior durability.
Suitable for cutting a variety of wires including piano wire.
The optimal blade position and angle, the design that maximizes the leverage principle, and the ergonomic shape of the handle - these three advantages allow for high cutting performance with low effort.
The hardness of the blade, which has undergone careful quenching treatment, is approximately HRC64.5.
The 250mm long type diagonal cutter can cut copper wire up to 16mm2 and aluminum wire up to 35mm.
Material is oil quenched and tempered chrome vanadium electrical steel
The selection of the most suitable material (chrome vanadium steel), the design that maximizes the use of the leverage principle, the optimal blade position and angle, and the combination of these outstanding features make the KNIPEX powerful diagonal cutter particularly suitable for cutting hard wire.In addition, forged shaft caulking is adopted for the joint part, and it is possible to work at ease even in the situation where a high load is applied.
Reduced burden by 21%: When cutting medium-hard wire with a diameter of 2.5mm, a general diagonal cutter (160mm) requires a force of 370 N (37.0 kp), while a powerful diagonal cutter (same size) can cut with a force of only 293 N (29.3 kp).
The head has an angle of 12 degrees for easy work on a flat surface.This allows for a clearance of approximately 70mm.

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

See all