Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
CB1300ST 03-14 ABS
CB1300SB 03-14 ABS
CB1300SF 03-14 ABS
CB1300ST 03-14
CB1300SF 03-14
CB1300SB 03-14
Tampilkan lebih banyak
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Posisi: Mundur 0mm / Naik 0mm
Mundur 10mm / Naik 10mm
Mundur 10mm / Naik 0mm
Mundur 20mm / Naik 10mm
Mundur 20mm / Naik 20mm
Operan gigi forward/reverse: Bisa
Ganti push rod: Ya
Warna: titanium gray
Hard anodized finish
Mundur 10mm / Naik 10mm
Mundur 10mm / Naik 0mm
Mundur 20mm / Naik 10mm
Mundur 20mm / Naik 20mm
Operan gigi forward/reverse: Bisa
Ganti push rod: Ya
Warna: titanium gray
Hard anodized finish
[Deskripsi]
●Step bar included
●Fully compatible with repair parts
●High strength aluminum alloy machined bracket & heel guard.
●Ultra-lightweight, high-rigidity change and brake pedals.
●The stop lamp can be used.
●The serration system allows you to adjust the angle of the pedals to suit your riding style.
*Serrations are adjustable in 10 degree increments for easy adjustment.
●Improved operability
Wave Washer COERCE step has a wave washer on the shaft.A normal washer is a part that connects parts to parts by the surface of the washer.However, this "wave washer" is a special washer which has a wave-shaped as the name suggests and connects parts to parts with "points".The purpose is to prevent the pedal from sliding and to improve the operability.Because of the "point" contact, the resistance to the pedal is reduced and stable operation performance can be obtained.If you apply grease at the first installation, you don't need to apply grease for a while afterwards.When bearings are used, operation is light, but greasing is required after riding in the rain, for example.In addition, the "Wave Washer" has the characteristic of pushing the pedal outward, so that the pedal can always be operated reliably without sticking.
●Regular and reverse shift can be done
Regular shift is a shift pattern set by each manufacturer to make riding easier on public roads.However, when the stage is, for example, a circuit or a winding road, it is controversial whether it is easy to drive or not.When you shift up while banking deeply in cornering, you have to put your toes between the pedal and the road surface, which is dangerous and sometimes impossible to shift depending on the road surface condition.The solution to this problem is "reverse shift".Most of the manufacturers use only "regular shift" pattern, or require parts seperately.Except for a few models, most COERCE models support "forward shift" and "reverse shift".
●Fully compatible with repair parts
●High strength aluminum alloy machined bracket & heel guard.
●Ultra-lightweight, high-rigidity change and brake pedals.
●The stop lamp can be used.
●The serration system allows you to adjust the angle of the pedals to suit your riding style.
*Serrations are adjustable in 10 degree increments for easy adjustment.
●Improved operability
Wave Washer COERCE step has a wave washer on the shaft.A normal washer is a part that connects parts to parts by the surface of the washer.However, this "wave washer" is a special washer which has a wave-shaped as the name suggests and connects parts to parts with "points".The purpose is to prevent the pedal from sliding and to improve the operability.Because of the "point" contact, the resistance to the pedal is reduced and stable operation performance can be obtained.If you apply grease at the first installation, you don't need to apply grease for a while afterwards.When bearings are used, operation is light, but greasing is required after riding in the rain, for example.In addition, the "Wave Washer" has the characteristic of pushing the pedal outward, so that the pedal can always be operated reliably without sticking.
●Regular and reverse shift can be done
Regular shift is a shift pattern set by each manufacturer to make riding easier on public roads.However, when the stage is, for example, a circuit or a winding road, it is controversial whether it is easy to drive or not.When you shift up while banking deeply in cornering, you have to put your toes between the pedal and the road surface, which is dangerous and sometimes impossible to shift depending on the road surface condition.The solution to this problem is "reverse shift".Most of the manufacturers use only "regular shift" pattern, or require parts seperately.Except for a few models, most COERCE models support "forward shift" and "reverse shift".
Catatan
-
Peringatan
*Termasuk tiang footstep.
Model yang Sesuai
CB1300ST 03-14 ABS
CB1300SB 03-14 ABS
CB1300SF 03-14 ABS
CB1300ST 03-14
CB1300SF 03-14
CB1300SB 03-14
Tampilkan lebih banyak
